Sourcing & Suppliers
Latest sourcing notes
-
Swim Spa Cover Sizing: What to Decide Before the Tape Comes Out
Swim spa cover sizing starts with the panel count, hinge position and skirt drop, not the tape. Decide the configuration before the outline is quoted.
-
Spa Filter Housing Types: Identify Yours Before You Order
Spa filter housing types differ in where the cartridge seats, how the lid seals and what bypasses the media. Identify the housing before parts.
-
Hot Tub Winterization Parts: Decide What to Change Before the Freeze
Hot tub winterization parts: what to change by where water sits, wet end, heater tube, unions and seals, air line and cover, before the freeze.
-
Spa Control Box: What to Check Before You Order Parts
A spa control box decides which parts are worth ordering. How to tell the box from the heater, pump, blower or lamp before you buy the wrong part.
-
Sauna Heater Parts: Match the Element, Stones and Control Before You Order
Order the right sauna heater part by reading the old element as a set, matching stones to the heater, and pairing the control to its load.
-
Spa LED Light Replacement: Match the Fitting, Then the Supply
Most spa light failures are a gasket, not a lamp. Read the fitting, identify the connector and size the transformer to the whole circuit before you order.
-
Spa Skimmer Parts: Matching Weir, Basket and Faceplate
Most skimmer callbacks trace back to a worn pivot pin, not a failed pump. Read the symptom, measure the throat, then order the part that fixes it.
-
Spa Water Treatment Parts: Choosing Between Lamp, Cell and Generator
Lamps, cells and ozone generators fail on consumables, not on brand. Match the part to its housing, the water volume and the market the spa ships to.
-
Spa Plumbing Parts: How to Choose a Seal by the Joint, Not the Name
A spa plumbing part is bought by media, bore and thread rather than by name. How a service company picks the right ring, union and adapter first time.
-
Hot Tub Blower Replacement: Air, Port and Mounting Together
A blower is chosen by the manifold it feeds and the cabinet it sits in, not by motor size. Port, mount, switching and the check valve decide the fit.