Single-unit orders welcomeOEM / ODMSpa, sauna and outdoor projects

Service parts · 04

Sauna Parts

A sauna is a small machine made of wood, stone and one hot element. We supply the element, the stones, the control that switches it and the timber that wears out around it.

Sauna heater with stone basket inside a timber cabin

Heater, stone basket and wall control as supplied for cabin builds; wattage and controller are confirmed per enquiry.

Sauna parts by position in the cabin.

Grouped the way a sauna is serviced: the heat source, the control, the stones, and the wood.

Sauna control panel, heater element tubes and sauna stones
Control panel, element tubes and stone grade shown together for reference.

Sauna heating elements

Sheathed elements for wall-mounted and floor-standing heaters, matched to the heater model and the room volume.

Thermostat and controller

Capillary thermostat, high-limit cut-out and the wall controller that sets temperature and time.

Black glass sauna control panel with amber icons mounted on a cedar wall beside the sauna door
Back of a sauna control panel showing the terminal block, relay and coiled capillary sensor

Sauna stones

Olivine and diabase stone in the graded sizes a heater basket expects, sold by weight. 5 to 10 cm suits most electric heaters; 10 to 15 cm suits larger and wood-burning stoves. Box weight is confirmed per enquiry.

Black steel sauna heater with a stone basket filled with 5 to 10 cm olivine diabase stones in a cedar sauna
Two heaps of sauna stones on an oak plank, split-face 5 to 10 cm beside larger 10 to 15 cm stones
A wooden ladle pouring water onto hot sauna stones with steam rising in a cedar sauna

Thermometer and hygrometer

Wall instruments for temperature and humidity, in wood or metal cases.

Wooden sauna thermometer-hygrometer and a 15-minute sand timer hanging on a spruce sauna wall

Bench slats and timber parts

Bench slats, backrests, duckboards and the spacer profiles, in the species the cabin was built from. Slats run 26–28 mm thick, 90 / 140 / 160 mm wide and 2100–2400 mm long, in SHP or SKY profile, set with a 6 mm gap. SHP and SKY name the two bench profiles we hold; the difference is the edge shape that meets the backrest.

Curved spruce sauna headrest and backrest on a bench with a folded towel
Stacked sauna bench boards in two widths with the machined profile visible
Sauna bench board screwed from below through a spruce bearer with an open ventilation gap

Door and glazing parts

Door handles, hinges, magnets and the tempered-glass fixings for cabin and barrel doors. Glazed doors are 8 mm tempered glass with stainless glass hinges, an oak handle and a silicone seal.

Cedar sauna cabin with a full-height 8 mm tempered glass door, oak handle and stainless hinges
Stainless glass-door hinge clamped to 8 mm tempered glass with a silicone gasket and oak handle

Vent grilles and timers

Adjustable vents for the supply and exhaust path; mechanical timers for heaters without a controller. Mechanical timers are the 60-minute countdown class. Grilles come in 285 × 155 mm and 340 × 130 mm, in hemlock or cedar with a sliding panel, set intake low and exhaust high.

Cedar sauna interior with wall-mounted junction box, heater guard rail, low and high vent grilles and a floor drain
Rectangular hemlock sauna air vent grille with the sliding panel part open
Sliding panel of a hemlock sauna vent showing the groove and brass thumb screw
Mechanical countdown timer mounted on a sauna cabin wall
Rear of a mechanical timer showing two screw terminals

Sauna light

Heat-rated lamp and the enclosure that survives the room. Housings take an E14 lamp holder, E27 on request; the wattage, heat rating and IP rating are confirmed per order for the fixture supplied.

Porcelain sauna wall light with a frosted glass shade on a cedar sauna wall
Porcelain E14 sauna lamp holder with a glass dome, steel retaining ring and a wooden guard shade

Reference data

Heater, bench and door hardware.

Sauna parts are matched to the heater first and the cabin second: the element must fit the basket, and the control must be rated for the element it switches. Choosing between an element, the stones and the control is set out in matching sauna heater parts.

Specification fields
Field Typical options and what we confirm
Heater model Basket size, element count and fixing pattern
Element power Quoted range: 3 – 18 kW across single and multi-element heaters. Heat output per element confirmed per enquiry.
Voltage and phase Typical: 220–240 V single phase, 380–415 V three phase, 50/60 Hz.
Stone weight and grade Typical: 5 – 10 cm for most electric heater baskets; 10 – 15 cm for larger and wood-fired heaters. 18 – 22 kg per heater basket.
Room volume Typical: 2 – 11 m³ per heater. The element set that matches a given cabin is confirmed per enquiry.
Timber species Bench and cladding material, which decides the spare
Control type Mechanical, capillary or electronic
Certification route Approval the destination market requires — approval arranged per order for the destination market
Cross-reference
Reference system Why it helps What to send
Heater label Model, power and voltage as printed by the maker Photo of the label on the heater
Heater photo Basket shape and element arrangement Photo of the open basket with the stones removed
Cabin make and model Narrows the timber profiles and door parts Brand, model and year
Old element Length and terminal arrangement Photo next to a rule
Room drawing Volume and vent positions Sketch with dimensions

Sauna heaters are matched on power against room volume; the figures are calculated per enquiry rather than published as a table. Brand names are used for cross-reference only.

What to photograph inside the cabin.

For a heater part, the label and the open basket answer almost everything.

  • Photo of the heater label
  • Photo of the open basket with the stones removed
  • Number of elements and how they are wired
  • Cabin internal dimensions
  • Which part failed: element, thermostat, controller or timer
  • Destination market and required certification

Wood moves.

Bench slats, duckboards and door parts are matched on species and profile, not on colour in a photograph. Send the profile and the species and the spare will sit flat.

Species first

Abachi, hemlock, spruce and thermo-treated aspen behave differently under the same heat.

Profile second

Slat width, thickness and the spacer that sets the gap.

Fixings included

Stainless screws and clips travel with the timber, because the originals rarely survive removal.

Questions about sauna parts.

Can you match a heater element without the model number?

With the element length, the terminal arrangement and the heater’s power rating, usually yes.

How much stone does a heater need?

It is set by the basket volume, not by the heater’s power; the figure is confirmed against the model.

Are the stones sold by weight?

Yes, in the graded sizes the basket expects.

Do you supply the controller with the element?

Both are quoted; the controller must be rated for the element it switches.

Can you supply bench slats in the original species?

Where the species is identified. A photo of the end grain and the profile helps.

Is a sauna light different from a normal lamp?

Yes. It must be rated for the temperature and the humidity of the room, with an enclosure to match.

Parts that complete the cabin.

The rest of the sauna and the parts around it.

Send the cabin detail for a checked reply.

One enquiry covers the sauna part, the fittings it needs and the market it ships to. Replies come from the person who checks the specification, not an autoresponder.